Report item
Item specifics
  • Model Number: LII500
  • Brand Name: liitokala
Product Description
Liitokala lii-500 is the biggest battery charger in the world! unique!!!
it can quickly detect the 3.7 and 1.2 the capacity of batteries.
and 1-1.5 USB 5 V output, adding 3.7 V lithium battery, you can give any 5 products.
a car charger, and functions.
contents of delivery:
1 X lii-500 18650/26650 Charger
1 X 12 2a ADAPTE (US / EU)
1 X tracking number
 
Warning in Tajikistan
 
1. This device can only charge Cylindrical lithium-ion batteries and nickel-metal hydride batteries, lithium iron phosphate battery;
 
2. Before use, please carefully see instructions Note Recommendations battery charging current does not exceed the recommended charging current;
3. Do not use a different power adapter;
4. Battery discharge devices may be hot, be careful not to burn;
5. Stop using, turn off the power, removing the battery;
6. It can be used only in a normal room.
7. This product test data for reference only, please consult a professional
equipment.
Secondly, the characteristics of
1.4 kinds of charging current regulator (ma / ma / 700mA / 1000mA);
2. Various specifications (...... 18650/26650 / AA / AAA) into the battery charger;
3. charger eliminates the use of a separate LCD screen, voltage (V) Current (MA) time (H) Capacity (mAh) resistance (MR) variants, E ... view;
4. under the charging mode, 4 channel work independently, you can select different charging current for charging and hunchong lithium-ion batteries and nickel-metal-hydride batteries.
5. under the Quick Test mode, 4 channels can quickly detect the battery capacity, regardless of the lithium-ion batteries and nickel-hydrogen batteries, to work independently. rapid detection of process capacity of the battery (1 category, 2 full two steps
6. Neither the test mode, the battery capacity is typically three phases (1 a first charging, and then dumped 2 and 3 spare) battery capacity detection process;
. 7. Charging and fast test / no test 3 modes can operate simultaneously; independent set charge / fast detection capability / Normal detection capacity;
8. Various protection functions: Overload and over discharge, short circuit, temperature, voltage of 0V function is activated (and Delta; V and 0 & Delta; V), 1.65 B 2.2 B can not be charged, intelligent recognition and bad battery detecting a reverse battery protection.
9. With a standard 5V / 1000mA USB output: 1-4 Lithium Batteries lithium batteries USB output is completed, the product can not be nickel-metal hydride battery with USB output.
10. With special power adapter: Input voltage DC: 12V / 2A.
Thirdly, a description of keys
 
1. The charger has six buttons, key mode (mode), this selection key (NAP), and view the data on their own selected key (1234), the use of simple and convenient;
2. Hold down the Mode button in any case and for 3 seconds to change the fee (free of charge) mode or a quick test, no test (capacity test) mode, then press again the corresponding function keys can be changed within 8 seconds, current, independent, Hunchong, the capacity of the test, the selected function after 8 seconds, in working condition, in working order, you can press (1234) to see the current (MA) / capacity (mAh) / voltage (V) / time (H) / resistance (MR) reference data.
fourthly, mode Description:
(Charge mode)
1. When power charger, charger all instant full brightness of the LCD screen when the battery is not placed in the Null display if it is a bad battery will also be displayed in the Null;
2. Insert the charger, the charger for three seconds or so to measure the internal resistance of the battery, then the system automatically switches to charging mode (FREE), the charger will automatically default charging current "500mA, 8 seconds for the current highlight key (NAP) Select 300mA, 500mA, 700mA, 1000mA charging current lock system that you choose will be charged for eight seconds, if 8 seconds is not set, then the system will automatically default charging current 500MA, current and other functions at this time it will not be changed if you want to change, change the mode of election of the press;
3. In the charging mode (FREE) for 8 seconds to change any of the independent charging or other current selection, as well as various hunchong battery. to make a simple, 8 seconds, press the corresponding button batteries 1234 Press the MODE button to change the mode, press the button to change the current Independent, Hunchong, detection capacity, chosen after 8 seconds in the operation, attention to select the size according to the current capacity of the battery charge, if not faster charging we recommend charging 500MA, it is the safest;
4. Charge mode by pressing, you can switch to see the 1234 charge capacity (mAh) / charging time (H) / battery internal resistance (MR) / charging current (AI), voltage (V) 5 types of units, battery fully charged after the show (end of charge);
II. The capacity of the detection mode (Quick Test or Test) two types of
() Rapid test (rapid capacity test mode)
1. when the power is turned back to the device, 8 seconds Touch (Key Mode) Select (quick test quick potential trial mode), then press the button (the current selection key CURREN) Select System 8 seconds after locking your choice to work. Quick Reference Table Capacity test procedure
quick test input current charge of battery discharge is selected
The first battery is low, then the battery is fully charged the battery, for the detection and recording capacity of the battery.
Please note that this product is the power test mode, discharge mode is divided into two types, when selecting the charging current (mA, 500mA), the system will automatically default 250mA current when selecting the charging current (mA, 1000mA), the system will automatically default 500mA current,
B) or test (Normal capacity detection mode)
1. No test mode: The first battery is fully charged and then discharge the battery discharge capacities to detect and record the capacity of the battery after the battery is fully automated; the ability to detect a process with reference TABLE II
No test input is selected and the current battery discharge
2. When the power is turned back to the device, 8 seconds Touch (Key Mode) no test mode is selected, in any mode, press the mode button for 2 seconds, you can enter any test mode;
3. After entering any test mode, you can select the key (NAP) Select 300mA, 500mA, Ma within 8 seconds, or 1000 mA, the current system is locked after selecting 8 seconds, 8 seconds, if not to make a set, the system will automatically block mA maximum charge current when the current default charging current is automatically selected when the discharge current of 250 mA discharge) ,, which for 8 seconds Select 700mA or 1000mA charge current automatically select the discharge current of 500mA discharge.
4. When the battery is fully charged, the system will automatically discharge, discharge current, the system default (the relationship Select the charging current), and writing data to detect the discharge capacity of the battery, when is displayed, the capacity of the test mode, this setting LCD display the actual capacity of the battery reference value.
5. Capacity Test Mode is complete, the charger will be selected by the current settings again before charging the battery to full.
five, USB 5 V output
5.1 USB 5 V only move as an output, the output current of 1000mA, USB output Connect the power void.
5.2 when the battery slot exports and USB / 5V to wake up, ready to 5V power supply and electronic products.
4x5.3 product, any Slot USB output can be recommended two slots in the battery.
5.4 USB 5 V output is only 3.7 V NiMH rechargeable Li-effective Increase invalid.
VI. specific parameters
6.1 Input Voltage: 12V / 2.0A
6.2 Li-ion battery charging current: 4.2 V 300mA / ma / 700mA / 1000mA
6.3 NiMH battery charging current: 1.48 mA / mA / 700mA / 1000mA
6.4 Rechargeable Battery Specifications: 18650.26650, 14500, AA, AAA, and others.
6.5 Discharge Current: 250mA, 500mA
6.6 USB Output: 5V --- 1000mA
6.7 Termination: Intelligent voltage monitoring
6.8 Size: 162 mm (length) * 96 mm (width) * 36 mm (height).
Display Illustrations:

08-31Lii-500-1HTB16sc2IXXXXXaMXXXXq6xXFXXXn

 

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.42kg (0.93lb.)
  • Package Size: 15cm x 13cm x 10cm (5.91in x 5.12in x 3.94in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.42kg (0.93lb.)
  • Package Size: 15cm x 13cm x 10cm (5.91in x 5.12in x 3.94in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.